KPLS 150 Bench Heater

KPLS 150 Heats seats and benches in churches and other public places,

  • The heater is installed under the seat.The heat is mainly radiated downwards.thus giving a good heat distribution over the cold legroom.The upwards-radiating heat increases the temperature of the seat.The bench heater saves energy.because it is necessary to heat only a part of the buildings and spaces.It also efficiently prevents excessive drying of statues and wooden parts.caused by traditional heating methods,
  • Refefence:
    D.Camuffo.et al,.An advanced church heating system favourable to artworks: A contribution to European standardisation.Journal of Cultural Heritage (2009).doi: 10,1016/j,culher,2009,02,008
    Read more about this study below
  • Abstract:
    The European project Friendly-Heating (FH): comfortable to people and compatible with conservation of artworks preserved in churches addressed the problems caused by the continuous or intermittent heating of historic churches.which disturbs the microclimatic conditions to which the building and the artworks preserved inside have acclimatised.As thermal comfort and the preservation of artworks often conflict with each other.a balance between the two needs is necessary.The proposed heating strategy is to provide a small amount of heat directly to people in the pew area while leaving the conditions in the church.as a whole.undisturbed.This novel heating system is based on some low-temperature radiant emitters mounted in a pew to provide a desirable distribution of heat to the feet.legs and hands of people occupying it.Due to little heat dispersion.this novel system not only significantly reduces the risk of mechanical stress in wooden artworks and panel or canvas paintings.fresco soiling and cyclic dissolution-recrystallization of soluble salts in the masonry.but is energy-efficient.The detailed environmental monitoring was conducted in the church of Santa Maria Maddalena in Rocca Pietore.Italy over a 3-year period to verify the performance of the novel heating system in comparison to the warm-air system that was active earlier in the church.The methodology and results of this comprehensive and multidisciplinary study were included in three draft standards of the European Committee for Standardisation intended for use in the study and control of environments of cultural heritage objects,

155.00 sis alv 24%

Kuvaus

KPLS 150 Bench Heater

The heater is installed under the seat.The heat is mainly radiated downwards.thus giving a good heat distribution over the cold legroom.The upwards radiating heat increases the temperature of the seat.The bench heater saves energy.because it is necessary to heat only a part of the buildings and spaces.It also efficiently prevents excessive drying of statues and wooden parts.caused by traditional heating methods,

Because of their design and silence the inconspicuous KPL heaters are well suited also in historically valuable objects.Upon agreement one may choose a heater colour of one’s choice from the colours in the RAL colour map,

Installation:

  • Define a place for the heater below the bench and mount the heater.Connect the mains supply cable and the installation lid.Only approved personnel may perform the installation,
    Control and regulation:
  • The regulation of the heater takes place using either a separate control switch or a thermostat.Because of its easy care an integrated control and regulation system is recommended in church applications,
Teho (W) 150
Jännite (V) 230
Mitat (leveys.pituus.korkeus) 700 x 300 x 37 mm
Pintalämpötila 80°C

Lisätiedot

Paino 3500.00 g (gramma)
Jännite(V)

230

Teho (W)

150

Pintalämpötila(°C)

80°C

Mitat

700 x 300 x 37 mm

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.